Dacor ERD60 User Manual - Epicure Range - Page 21
Replacing the Oven Lights
View all Dacor ERD60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Care and Cleaning Replacing the Oven Lights caution • Make certain that the oven and light bulb are cool and that power to the oven has been turned off before replacing the light bulb. • Always ensure that the lens cover is in place when using the oven. The lens cover protects the bulb from breakage caused by high oven temperatures or mechanical shock. Replacing a Light Bulb Light bulb replacement is considered to be a homeowner maintenance operation. 5. Turn the power back on at the main power supply. 6. Reset the time of day. (Refer to the Setting Up Your Range section). EGR Series Ranges: 1. Turn off the power at the main power supply. 2. Remove the threaded lens cover from the housing by rotating counterclockwise. 3. Pull the light bulb out and replace it. 4. Reinstall the threaded lens cover by rotating clockwise. ERD Series Ranges: ERD range models have halogen oven lights to enhance the view into the oven. The light assembly consists of a removable lens cover and 10-watt 120 Vac halogen bulb, as well as a light fixture housing. 1. Turn off the power at the main power supply. 2. Remove the lens cover from the housing by pulling straight out. In some cases the lens cover may be tight enough to require the use of your light lens pry stick. It comes packed inside of your broiler pan along with the use and care manual. Use the lens pry stick with caution. Do not cause uneven stress on the lens cover. Gently insert the pointed end of the pry stick under the center edge of the lens cover on the side facing the oven door. Hold your hand under the lens for support then pry out to remove. 3. Pull the light bulb out and replace it with a special 10-watt halogen bulb rated for use in a self-cleaning oven. Use Dacor Part No. 86364 available from any authorized Dacor parts distributor or at www.everythingdacor.com. 4. Reinstall the lens cover by aligning the cover over the opening and gently pressing it into its original position. IMPORTANT: Be sure to line up the cutout in the lens with the light socket. Light Socket (EGR Series Models) 5. Turn the power back on at the main power supply. 6. Reset the time of day. See the Setting Up Your Range section. Light Socket (ERD Series Models) 19