Dacor ERV48 Planning Guides - Page 1

Document # PG08-001 ERV30, ERV36, ERV48, PRV30, PRV36, PRV46 30", 36", 46", 48" Wide, Slim Raised Vent Revised 03/29/10 Page 1/3 PLANNING GUIDE 2 3/16" (56 mm) 5/16" (8 mm) 2 1/8" thick stiffener (54 mm) across back 2 1/2" (64 mm) 3/16" (5 mm) 1 15/16" (49 mm) 2 9/16" (65 mm) Top cap with vent down 9/16" (14 mm) Vent shown in raised position 10" (254 mm) warning • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • This appliance must be installed in accordance with the accompanying installation instructions. All tolerances: ±1/16" (±1.6 mm) unless otherwise stated 3/8" (10 mm) A 2 1/8" (54 mm) ERV top cap - side view 7/16" (11 mm) 2 1/8" (54 mm) PRV top cap - side view 18 5/8" (473 mm) 3 3/4" (95 mm) 1" (25 mm) 30 ¼" (768 mm) 30" (762 mm) to 37 ¼" (946 mm) B 6" (152 mm) Motor cover Front of unit Product data label 28" 3 prong grounded power cord Dimensions Side View Adjustable anchor legs Dimensions Front View Model No. A B Circuit Requirement* ERV/PRV30 ERV/PRV36 PRV46 ERV48 30" (762 mm) 36" (914 mm) 46" (1168 mm) 48" (1219 mm) 27 3/8" (695 mm) 33 3/8" 848 mm) 43 3/8" (1102 mm) 43 3/8" (1102 mm) Three prong electrical outlet connected to 120 Vac, 60 Hz, 15 Amp. grounded, dedicated, circuit * Includes power supply requirements for external blower NOTES: 1. The maximum installed height must not exceed the maximum specified countertop height of cooking appliances. 2. Install these raised vents only with approved Dacor appliances. See the planning guide for the particular appliance for proper applications and cutout information. 3. This appliance must be install in conjunction with a single Dacor approved remote or in-line blower. See following pages for approved blowers. Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093 8.1