Dacor MORS130 Use & Care Manuals - Page 11
Racks
View all Dacor MORS130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Operating Your Oven Racks You may use either rack type on any level inside the oven. warning To reduce the chance of burns, position the oven racks when the oven is cool. If you must reposition a rack when the oven is hot, use pot holders. To insert the standard oven racks... 1. Insert the end of the rack with the safety notches into the oven first. 2. Attach both sides of the rack to the rack supports in the oven as shown in the diagram below. 3. Begin to slide the rack in, and then, lift up so that the safety notches clear the ends of the rack supports. 4. Push the rack all the way in with both hands. To remove the standard oven racks... • If you want to remove an oven rack, grasp it with both hands and pull gently straight out toward you until it stops. • To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety notches. The safety notches reduce the chances of a rack coming out of the oven accidentally. To insert your GlideRack oven rack... Your oven comes with a Dacor GlideRack oven rack. You can pull the GlideRack oven rack out further than the standard racks and still support heavy pots and pans full of food. It is great for heavier foods and the optional Dacor baking stone. 1. Hold the GlideRack oven rack with the guides fully extended away from you (see the diagram below). 2. Align both sets of safety clips (right and left) on the back of the guides with the oven rack supports as shown. 3. Begin to slide the rack in, lifting the front safety clips over the front of the oven rack supports. 4. Push the rack all the way to the back. 5. Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place. To remove your GlideRack oven rack... • Grasp it with both hands and pull gently straight out toward you until it stops. • To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety clips. The safety clips reduce the chances of it coming out of the oven accidentally. Back of rack Guides Lift front safety clips over rack supports Front of rack Standard Rack Rack support Front of rack GlideRack Oven Rack Back of guide Safety notch Slide oven rack supports into slots on the rack 9 Oven rack support Slide oven rack supports between back safety clips