Dacor MRES30S Combined Configuration - Page 1

COMBINATION INSTALLATIONS Document # PGCI - 011 MRES30 Electric Range/ Slim Raised Vent Revised 03/10/10 Page 1/1 PLANNING GUIDE warning • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • All appliances must be installed in accordance with the accompanying installation instructions. All tolerances: +1/16", -0, (+1.6 mm, -0) unless otherwise stated Vertical non-combustible surface rear wall 27 7/8" (708mm) Backsplash thicker than 3/4" (19mm) 27 13/16" (706mm) 13/32" (10mm) Adjust for backsplash over 3/4" thick from 13/16" to 3 13/16" (21 - 97mm) 29 1/4" (743mm) 30 1/16" (764mm) Countertop overhangs cabinet 1/4" (6mm) Min. flat ledge 2 13/16" (71mm) 10" (254mm) Min. to combustible side walls above the range (both sides) Top View - Downdraft ERV30 with Slide-In, Self-Rimming Installation using 3" Side Panels (Numbers ARSR30 and ARSL30), with Backguard Removed Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093 CI.7