Dacor PHG30 Use & Care Manuals - Page 8

Care and Cleaning Maintenance warning • To prevent an electric shock hazard, turn off the main power switch before replacing the light bulb. • To avoid personal injury, make sure the cooktop or range, the hood and the light are cool before changing the light bulb. 4. Line up the prongs on the new light with the holes in the light socket. If there are more than two holes, insert the prongs into the center two holes. You may need a flashlight to see inside the opening. Light Bulb Replacement Light bulb replacement is considered to be a homeowner maintenance operation. If the light does not work, before replacing it, check to make sure that the main circuit breaker (or fuse) and the main power switch on the hood are on. Replace the light bulb only with Dacor Part No. 101945. See the replace, available from any authorized Dacor parts dealer. 1. Turn off the main power switch, located next to the light. 2. Reach up into the hood and pry the edge of the lens loose with a flat blade screwdriver, or disposable plastic knife. If using a flat blade screwdriver, cover the end with tape to avoid damage to the metal surfaces. 5. Gently push up on the new light until it stops. 6. Turn on the main power switch. Touch the light key to make sure it is working. Replacement Parts Dacor Part Number Description 101945 Light bulb 101951 Filter (two per unit) A300 Dacor Cooktop Cleaning Cream A302 Dacor Stainless Steel Cleaner To order parts and accessories, contact your Dacor dealer or visit www.everythingdacor.com. 3. Once the light bulb is loose, pull down on it with a gentle rocking motion until it pulls free. 6