Dacor RNF241WCL Installation Instructions Dual Zone Model - Page 11
Installation, Care and Cleaning, Care and, Cleaning
View all Dacor RNF241WCL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Before You Call for Service Problem May be caused by The door will not close properly. Appliance not level. What to do Level the appliance. See Installation section. Alarm sounds and temperature display NOT flashing (door alarm). Alarm sounds AND temperature display flashes (temperature alarm). "--" (straight line) appears on the display. Vibrations. The appliance seems to make too much noise. E0, E1, E2, E3, E4, E5, E6 or E7 appears on the display. Door will not open. The gasket is dirty. The shelves are not properly seated. Door has been left open longer than 60 seconds. Clean the door gasket. See Care and Cleaning section. Re-seat Shelves. See Care and Cleaning section. Close door, or touch POWER key to disable alarm. Alarm will reset when door is closed. Door being opened too often. Keep door closed. Vent on front of unit is blocked or Remove blockage or clean vent. See Care and dirty. Cleaning section. Long power interruption. Keep door closed and allow unit to cool to set temperature. A large number of bottles have been added to the unit. Keep door closed and allow unit to cool to set temperature. Temperature display is out of the range. Only temperatures within the range of 16 to 99°F (-9 to 37°C) can be displayed. Keep door closed and allow unit to cool to set temperature. Appliance not level. Level the appliance. See Installation section. A rattling noise may come from the flow of the refrigerant, which is normal. Gurgling sounds may be caused by the flow of refrigerant in your appliance, which is normal. If temperature fluctuations occur, the contraction and expansion of the inner walls may cause popping and cracking noises, which is normal. Appliance not level. Level the appliance. See Installation section. Error codes. Try resetting the controls by disconnecting power to the unit for 5 minutes, then reconnect. If error code returns, problem cannot be resolved by user. Call for service. Door locked. See page 3. The door will not close properly. Appliance not level. The gasket is dirty. The shelves are not properly seated. Level the appliance. See Installation section. Clean the door gasket. See Care and Cleaning section. Re-seat Shelves. See Care and Cleaning section. 9