Dacor RNRP36G Use Care Manual - Page 6

Getting to Know Your Range Parts of the Cooktop BACKGUARD: The range comes standard with a three inch backguard installed. The backguard protects the wall from the effects of heat and splattering grease. A nine inch backguard is also available. SPILL TRAY: The spill tray catches any food that falls through the cooktop grates. GRATES: The porcelain coated cast iron grates support the cooking utensils during cooking. They are removable to allow the area below and around the burners to be cleaned easily. BURNERS: See below for the size and location of the different burners. The range generates a spark to light the burner when you turn the knob to the HIGH position. BURNER CONTROL KNOBS: Use the knobs to turn on the burners and adjust the flame size. The corresponding Illumina™ knob illuminates when a burner is on. The center knob operates the oven. TRIM RINGS: Located behind each knob, they prevent liquids from getting into the internal parts. Trim ring Burner control knob Grate Spill tray Backguard Burner Burner Locations and Features A. 800* to 15000 BTU standard burner B. 800* to 18000 BTU SimmerSear burner *Effective Special Cooktop Features Perma-Flame™: The Perma-Flame instant re-ignition feature automatically re-lights a burner quickly if it goes out. With Perma-Flame, your cooking experience is uninterrupted because the flame is reignited at the same level as when it went out. Smart Flame™: Smart Flame technology reduces the temperature under the fingers of the porcelaincoated cast iron grates. Smart-Flame extends grate life and protects the finish. SimmerSear™: The SimmerSear burners are equipped with Dacor's exclusive precision burner control system. This feature allows you to cook with a wide range of heat settings, from simmer to sear. 4