Dacor RO230 Use & Care Manuals - Page 33

Before You Call for Service Problem Solution Guide - (continued) Problem Oven goes into hold mode too quickly after meat probe is connected. Cooling fan continues to run after oven has been turned off. Time on display not correct. Cannot set clock. Time flashes on display. Control panel does not "beep" when touching the keys on the control panel and when the timer runs down to zero. Error code appears and stays on display, for example "U55." May Be Caused By Meat probe connector is still wet after cleaning. Normal operation. Time of day not set. Power failure or power was turned off. Oven in use. Clock cannot be set while oven is in use. Power failure or power was turned off. Control panel tone ("beep") is set to off. An error code having a letter with a number following it that appears and stays on the display indicates a problem that cannot be resolved by the customer. What to Do Dry the metal portion of the plug that connects to the oven using a soft dry rag. The cooling fan may run for a while after the oven is turned off, until the internal parts have cooled. Set time. See page 8. Reset time. See page 8. Turn off oven to set clock. Reset time. See page 8. Turn control panel tone ("beep") on. See page 8. Call for service. Part and Accessories Description Dacor Part Number Halogen light bulb (12 Volt, 20 Watt) 100429 Meat probe 72723 Standard broil pan 82107 Grill for standard broil pan 82108 30 Inch standard type oven rack 106992 30 Inch GlideRack type oven rack 701464*, ARGO30H** Large capacity roast/broil pan with "V" shaped rack AORPVR Pizza baking stone ABS20 Cookie sheets, 30 inch*** (3 per carton) Call your Dacor dealer * Use this number for ordering a replacement under warranty. ** Use this number for ordering additional racks, not covered under warranty. *** Dacor full size cookie sheets maximize oven rack baking capabilities by utilizing the total usable rack space. To order parts or accessories, contact your Dacor dealer or visit www.everythingdacor.com 31