Danby DCR412BLLH Product Manual - Page 2

IMPORTANT SAFETY INSTRUCTIONS ELECTRICAL This appliance must be grounded. In the event of an electrical short circuit, REQUIREMENTS grounding reduces the risk of electrical shock by providing an escape wire for the electrical current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. IMPORTANT WARNING WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. An empty refrigerator can pose a threat to children. To render the unit harmless we strongly recommend removing the door prior to disposal. DO NOT USE AN EXTENSION CORD Use an exclusive wall outlet. Do not connect your refrigerator to extension cords or together with any other appliance in the same wall outlet. SAVE THESE INSTRUCTIONS! INSTALLATION INSTRUCTIONS Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, lukewarm cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or moisture. Let air circulate freely around the unit. Keep the rear of the refrigerator 5 inches away from the wall. Location 1) Select a place with a level floor. 2) Allow 5 inches of space between the back of the refrigerator and any adjacent wall. 3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will cause higher electricity consumption. 4) Avoid damp places. Too much moisture in the air will cause frost to form very quickly on the evaporator, and your refrigerator will have to be defrosted more frequently. NOTES: • This appliance is intended for FREE-STANDING installation ONLY, and is not intended to be built-in. • Before connecting this appliance to electrical power supply, leave it to stand for approx. 2 hours, which will reduce the possibility of malfunction in the cooling system due to transport handling. • This appliance is approved for INDOOR USE ONLY and is not intended for outdoor use. 1