Danby DMW099BLSDD Product Manual - Page 9

OPERATION FAST START COOKING 1) Instant cooking (from waiting state) at 100% power level can be started by selecting a cooking time from 1 to 6 minutes, by pressing the number pads 1 to 6. Press "START/+30SEC." to increase the cooking time; the maximum cooking time is 99 minutes and 59 seconds. 2) Instant cooking at 100% power level for a duration of 30 seconds' cooking time can be started by pressing "START/+30SEC.". Each press on this button will increase cooking time by 30 seconds (to a maximum of 99 minutes, 59 seconds). NOTE: During microwave cooking, auto menu and time defrost, time can be added by pressing the "START/30SEC." button. However, the operation will not work under "WEIGHT DEFROST" operation. WEIGHT DEFROST 1) Press "WEIGHT DEFROST"; LED will display "dEF1" and and indicators will illuminate. 2) Press the number buttons to input defrosting weight. The accepted weight is 4-100 OZ. If the weight input is not within this range, no "beep" will sound and the microwave will not function until valid numbers are input. 3) Press "START/+30SEC" to start defrosting. The remaining cooking time will be displayed, ":", and indicators will be flashing. TIME DEFROST 1) Press "TIME DEFROST"; LED will display "dEF2" and and indicators will illuminate. 2) Press the number buttons to input defrosting time. The accepted time range is 00:01-99:99; if the time input is not within this range, no "beep" will sound and the microwave will not function until valid numbers are input. 3) Press "START/+30SEC." to start defrosting and the remaining cooking time will be displayed; ":", and will be flashing. 4) The default microwave power is power level 3. If you want to change the power level, press "POWER" once, and the LED will display "PL3"; press the number of the power level you desire. AUTO MENU POPCORN: a) Default mode 1) Press "POPCORN" to select popcorn mode; , indicators and "Oz" are illuminated; "1.75", "3.0", and "3.5" appear in the display. 2) Press "START/+30SEC." to start cooking; buzzer will sound once, "Oz" will go out, and and will flash. 3) When cooking is over the buzzer will sound 5 times, LED will display "0:00". If the clock is set the LED will display current time. same indicators as in step 1 of part a will illuminate and "1.75", "3.0", and "3.5" oz. options will appear. 2) Press "MEMORY"; LED will display the cooking time of the weight and minute figure will flash. 3) Press the number keys to enter time desired. 4) Press "MEMORY" to save the setting. Press "START/+30SEC." to start the cooking time and the two indicators will flash as in step 1 of part a. To change the set cooking time repeat step 1. Press and hold "POPCORN" button for more than 3 seconds and the microwave will revert to the initial setting. b) Cooking time adjustable mode. 1) Press "POPCORN" to select popcorn mode; the 8