Danby DMW1158W User Manual - Page 13
START, COOKING, STOP/Clear, QUICK, One and, Two- Stage, Cooking
View all Danby DMW1158W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
OPERATING INSTRUCTIONS START COOKING IMPORTANT: You can pause or cancel cooking operation at any time by touching "STOP/Clear" or opening the microwave door. To Pause: Touch "STOP/Clear" until a single beep is heard, or microwave countdown stops. To Cancel: Touch "STOP/Clear" twice (two beeps sound), or until the clock returns to the display (or 0:00 if clock is not set.) QUICK COOKING 1. Touch "START/+30 sec." pad for 30 seconds of cooking. Microwave instantly begins cooking. If the cooking time is an interval of 30 seconds (e.g. 1 min., or 1 min. 30 sec., 2 min., etc.) you can instantly start to cook using this method. See also "If more cooking time is needed..." below. If the recipe requires a lowered cooking power level, or the recommended cooking time is not an interval of 30 seconds, see One and Two-Stage Cooking below. One and Two- Stage Cooking This method is ideal for recipies that require a reduced cooking power level, or meals with special cooking times (i.e. not in intervals of 30 seconds as in "Quick Cooking".) 1. Touch the "POWER" pad. PL10 appears on the display. 2. Each additional touch of the "POWER" pad will reduce the power by 10%. For more information on power levels, see section "Power Levels". To use default power, simply move on to step 3. 3. Enter the cooking time by touching the corresponding numbers on the number pad (e.g. touch 1, 1, and 5 for 1 minute and 15 seconds (1:15)). 4. For Two-Stage Cooking, repeat steps 1 to 3 and then continue to step 5. 5. Touch the "START/+30Sec." pad. Cooking time will begin to countdown until it reaches zero ( :00 on the display). The oven will then resume showing the time (if set) and sound five beeps. If more cooking time is needed... At any time and for any operation, even while the oven is cooking, touching the "START/+30Sec." pad adds 30 more seconds of cooking time each time the pad is pressed. NOTE: The added cooking time will use the same power level that is currently being used by the microwave. For example, if the Power Level is currently set to 50% (PL5 on the display), then the added cooking time will use a Power Level of 50%. 12