Danby DPAC11010 Product Manual - Page 11
Troubleshooting
View all Danby DPAC11010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TROUBLESHOOTING PROBLEM • Unit does not work POSSIBLE CAUSE • Power is out • The plug is not plugged in properly • The full-tank indicator is ON; tank is full • Current leaking or pressing test button on LCDI plug SOLUTION • Wait for power to return • Plug in properly • Remove drain water from the drain tank • Press the reset button after resolving problem • Unit suddenly stops during operation • Indoor set temperature has been reached • The preset time is up • The full-tank indicator is ON; tank is full • Reset the temperature level • Reset the timer • Remove drain water from the drain tank • Unit runs intermittently • Malfunction • Surrounding temperature is too high/low • Exhaust duct hose is blocked • Contact your dealer • This is normal • Check the duct hose • Unit functions but the room is not cooled • Window or door is open in room • There is a heat source or too many people in the room • Air intake grill is clogged • Filter is too dirty • Temperature setting is too high • Close all windows/doors • Move any heat sources from room • Clean air intake grill • Replace the filter • Lower temp. setting • Condensed water spills • The tank is nearly full out when moving the unit • Remove drain plug on rear bottom and drain out water 10