Danby DUF570WDD Product Manual - Page 7

Door Removal & Replacement Base Grille 1A Door Swing Reversal (optional) 2 A A. Cabinet Hinge Hole Plugs Top Hinge 1B A B C A. Top Hinge Cover B. 3/8" Hex-Head Hinge Screws C. Top Hinge Bottom Hinge 1C A B C D E A. Door Stop Screws B. Door Stop C. Hinge Pin D. Hinge Pin Nut E. 5/8" Hex-Head Hinge Screws Left Hand Hinge Door Stop Right Hand Hinge 4 Door Stop 5 A 3 B C D E A. Door Stop Screws B. Door Stop C. Hinge Pin D. Hinge Pin Nut E. 5/8" Hex-Head Hinge Screws Door Handle Seal Screw Handle 1-1 A B C B A A. Handle Trim B. Handle Screws C. Handle Adjust the Door 1. Locate the two front leveling legs taped among the packing materials. 3. Adjust the front legs enough to lift the cabinet up off of the floor. 2. Screw these legs into the front holes on the bottom of the freezer. The back of the freezer rests on two fixed supports. NOTE: If your model is equipped with rollers, the front legs should be lowered enough to lift the rollers off of the floor to ensure the freezer does not roll forward when the door is opened. 7