DeLonghi BCO330T Owner Manual - Page 13
Troubleshooting, Espresso and Cappuccino water level, CAPPUCCINO / ESPRESSO, DRIP COFFEE - 11
View all DeLonghi BCO330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
en Troubleshooting Problem Possible causes Solution No espresso coffee is delivered No water in the boiler Fill the boiler with water The holes in the filter holder are blocked Clean the filter holder spout holes CAPPUCCINO / ESPRESSO The filter is clogged. Clean the filter and holes thoroughly using a pin The espresso takes longer to The coffee is ground too fine, or too much Use a different kind of coffee, put less brew coffee in the filter, or pressed coffee. coffee into the filter and do not press the coffee. No milk froth is formed when Milk not cold enough making cappuccino Always use skim milk at refrigerator temperature. Cappuccino maker dirty Thoroughly clean the holes in the cappuccino frother The drip coffee takes longer to The drip coffee machine needs to be Descale as described in the section brew descaled DESCALING THE DRIP COFFEE SECTION DRIP COFFEE The coffee has an acidic taste Inadequate rinsing Rinse the appliance as described in the section DESCALING THE DRIP COFFEE SECTION Leaks on counter Filled too much water Be sure to do not fill more than the 10 cups of water as specified on fig. 8, pg.4. ON/OFF light does not stay on The automatic shutoff time is set at 0.00 See section"Length of warming time" To make 2 espressos 2 cappuccinos 4 espressos 4 cappuccinos Water level Espresso and Cappuccino water level Quantity of ground coffee Quantity of coffee before to place in the filter making steam 4 2 4 2 4 2 4 2 11