DeLonghi DCH5090ER Owner Manual - Page 5

5

6.

Eco function

In this operating mode the appliance will

automatically set the power level to gua-

rantee the best comfort reducing the

energy consumption. In this operating

mode the unit may switch the heating

power level from maximum to minimum

and viceversa, several times in an hour.

When using the ECO function, the maxi-

mum temperature setting is 79°F (26°C).

To activate this function, press the ECO

button (

D

). The unit, will

always start at

the maximum power.

7.

If you want the appliance to distribute the

airflow over a larger area, press the oscil-

lation button (

C

) (

). The appliance will

then oscillate right and left. To stop the

oscillation in the desired position, just

press oscillation button (

C)

again.

8.

To turn off the appliance press button

ON/OFF (

A

). The display will show a count

down for about 6 seconds.

NOTE:

The display can show the temperature

in both °F and °C. To change the temperature

scale, press and hold the + key for few

seconds, then release.

24-HOUR DIGITAL TIMER

This function can be activated from any opera-

ting mode.

Delayed switch-on:

with the appliance in the

OFF position, press the timer button (

E

) (

).

The display shows the symbol

and the

time remaining before switch-on. To set the

timer, use the + and - adjustment buttons

(

B

), then wait a few seconds for the pro-

gramming to be set.

The display returns to show “

●

” for stand-

by and the symbol

to indicate you have

set the timer. When the programmed time

has been reached, the appliance turns on

with the same settings it had during the pre-

vious operation.

Delayed shut-off:

With the appliance on, press

the timer button (

E

) (

). The display

shows the symbol

and the time remai-

ning before shut-off. To set the timer, use

the + and - adjustment buttons (

B

), then

wait a few seconds for the programming to

be set. The display returns to show the cur-

rent settings and the symbol

to indicate

you have set the timer. When the program-

med time as been reached the appliance

shuts off automatically.

If you want to go back to operation without the

timer, press the timer button (

F

) twice.

The timer symbol

disappears from the

display.

MAINTENANCE

-

Before carrying out any maintenance,

always remove the plug from the power

outlet.

-

During the season when the appliance is

being used, regularly clean the air intake

and outlet grilles using a vacuum clea-

ner.

-

Never use abrasive powders or solvents to

clean the appliance.

WARNINGS

-

Never use this heating appliance in the

immediate vicinity of a bathtub, shower, or

swimming pool.

-

Use the appliance always and only in the

vertical position.

-

Do not use the appliance to dry laundry,

and do not obstruct the air intake and

outlet grilles (danger of overheating).

-

Do not operate the appliance in contact

with walls, furniture, curtains, etc.

-

If the power cord is damaged, it must be

replaced by the manufacturer, the authori-

zed service facility, or a qualified electri-

cian, in order to prevent the risk of mal-

function.

-

Do not cover the appliance while it is ope-

rating, as this could potentially cause a

fire.

-

Do not use this appliance in a room smal-

ler than 43 square feet (4 m²).

-

Heaters should never be used with an

extension cord or outlet strip. Heaters

should be plugged directly into an outlet.

-

Before storing the appliance, check it is

completely off and the cable is unplugged.

At this point wrap the cord around the base.

Do not store in a dusty room. The room

temperature should be between 32-86°F (0-

30°C). Do not load anything above it.

-

Heaters draw more current than small

appliances, overheating of the outlet may

occur even if it has not occured with the

use of other appliances.

DeLonghi DCH5090ER Owner Manual - Page 5

always remove the plug from the power

Page 5 highlights