DeLonghi DK100 Owner Manual - Page 6

connectors

Page 6 highlights

Switching on • Plug the power base into the mains socket. • Place kettle on power base. • Press the ON/OFF switch down (fig. 6) to switch the kettle on. • The pilot fights will switch on. • The kettle will automatically switch off once the water is boiled (the ON/OFF switch will click upwards and the lights will go out). • To turn the kettle off before the water boils, you may move the ON/OFF switch up to the OFF position, or simply lift the kettle from its base - it will switch off and the switch will return to the OFF position automatically_ Pouring • Remove the kettle from the power base and carefully pour out the water. Do not tilt kettle suddenly or pour out at too sharp an angle. • When you lift the kettle from the base, you may see moisture on the top surface of the base. This is condensation from the steam that causes the kettle to turn off automatically after boiling. Steam is allowed to escape via vents in the underside of the kettle. Condensation on the base is perfectly normal, and should not be a cause for alarm. SAFETY DEVICES 1) Automatic ON/OFF switch Your kettle is fitted with an ON/OFF switch which automatically switches off once the water has boiled. IF the kettle has just boiled, wait a minute or so before re-boiling the kettle. Do not attempt to hold the ON/OFF switch in the ON position or adjust the switch mechanism. 2) Safety cut-out If the kettle is switched ON with too little or no water, it is protected against damage by a safety cut-out which will switch off the power. If this cut-out operates, disconnect the kettle from the mains supply and leave to cool down before refilling with cold water (otherwise the element could be damaged). 3) If kettle is lifted from base while operating (ON), it will automatically switch off. CARE AND MAINTENANCE Cleaning the kettle • Allow the kettle to cool down fully and disconnect the appliance from the mains before cleaning. • Do not immerse the kettle or base in water. • Use a soft dampened cloth to wipe the outside of the kettle and dry with a soft, dry cloth. • DO NOT use metal polish or harsh scouring agents. • Ensure that all connectors and sockets are kept dry. Scale Scale is mainly calcium carbonate (chalk), a harmless, naturally occurring mineral found in most water supplies. "Hard" water contains more of this mineral than "soft" water. When water is heated, the minerals in the water solidify, making the water appear cloudy. These 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Switching
on
Plug
the
power
base
into
the
mains
socket.
Place
kettle
on
power
base.
Press
the
ON/OFF
switch
down
(fig.
6)
to
switch
the
kettle
on.
The
pilot
fights
will
switch
on.
The
kettle
will
automatically
switch
off
once
the
water
is
boiled
(the
ON/OFF
switch
will
click
upwards
and
the
lights
will
go
out).
To
turn
the
kettle
off
before
the
water
boils,
you
may
move
the
ON/OFF
switch
up
to
the
OFF
position,
or
simply
lift
the
kettle
from
its
base
-
it
will
switch
off
and
the
switch
will
return
to
the
OFF
position
automatically_
Pouring
Remove
the
kettle
from
the
power
base
and
carefully
pour
out
the
water.
Do
not
tilt
kettle
suddenly
or
pour
out
at
too
sharp
an
angle.
When
you
lift
the
kettle
from
the
base,
you
may
see
moisture
on
the
top
surface
of
the
base.
This
is
condensation
from
the
steam
that
causes
the
kettle
to
turn
off
automatically
after
boiling.
Steam
is
allowed
to
escape
via
vents
in
the
underside
of
the
kettle.
Condensation
on
the
base
is
perfectly
normal,
and
should
not
be
a
cause
for
alarm.
SAFETY
DEVICES
1)
Automatic
ON/OFF
switch
Your
kettle
is
fitted
with
an
ON/OFF
switch
which
automatically
switches
off
once
the
water
has
boiled.
IF
the
kettle
has
just
boiled,
wait
a
minute
or
so
before
re
-boiling
the
kettle.
Do
not
attempt
to
hold
the
ON/OFF
switch
in
the
ON
position
or
adjust
the
switch
mechanism.
2)
Safety
cut-out
If
the
kettle
is
switched
ON
with
too
little
or
no
water,
it
is
protected
against
damage
by
a
safety
cut-out
which
will
switch
off
the
power.
If
this
cut-out
operates,
disconnect
the
kettle
from
the
mains
supply
and
leave
to
cool
down
before
refilling
with
cold
water
(otherwise
the
element
could
be
damaged).
3)
If
kettle
is
lifted
from
base
while
operating
(ON),
it
will
automatically
switch
off.
CARE
AND
MAINTENANCE
Cleaning
the
kettle
Allow
the
kettle
to
cool
down
fully
and
disconnect
the
appliance
from
the
mains
before
cleaning.
Do
not
immerse
the
kettle
or
base
in
water.
Use
a
soft
dampened
cloth
to
wipe
the
outside
of
the
kettle
and
dry
with
a
soft,
dry
cloth.
DO
NOT
use
metal
polish
or
harsh
scouring
agents.
Ensure
that
all
connectors
and
sockets
are
kept
dry.
Scale
Scale
is
mainly
calcium
carbonate
(chalk),
a
harmless,
naturally
occurring
mineral
found
in
most
water
supplies.
"Hard"
water
contains
more
of
this
mineral
than
"soft"
water.
When
water
is
heated,
the
minerals
in
the
water
solidify,
making
the
water
appear
cloudy.
These
6