DeLonghi KBM1511 Owner Manual - Page 6

BEFORE USE • Remove all packaging from the kettle and power base. • Remove any labels from the outer stainless steel surfaces. • Remove the filter (fig. 1) and wash with water (fig. 2). Refer to page 8. "Removing the water filter" • Fill the kettle with water, plug power cord into outlet and turn the unit "ON" (for details see "Switching On"). • The boiled water should be discarded and the kettle rinsed out with cold water. This procedure should be carried out three times, to remove any manufacturing dust, etc. • After the kettle has been rinsed out, replace the filter (fig. 3). c a b 1 2 IN USE Power base with 360° access With the specially designed power base and central connector, you can now set the kettle on the base at any angle, from any position. • Release cord from storage base and adjust length by winding around the base to give the correct cord length to reach the outlet to be used (fig. 4). • Do not leave loose cord hanging over the edge of work surfaces. Filling • Remove the kettle from the base unit before filling. • Open lid and fill kettle to desired level. In some models, a handy external water level indicator (I) enables you to see the quantity of water in the kettle. Do not fill with less than 0,25 liters(10-Ounces) of water to prevent the kettle running dry while operating; misuse of this kind will shorten the life of the element. Do not fill with more than 1,7 liters (58-Ounces) of water (up to the MAX indication located inside the kettle) (fig. 5). If the kettle is overfilled, there is a risk that boiling water may be ejected causing burns. A handy water level indicator enables you to see the quantity of water in the kettle. 1 2 3 4 MAX 1.7 Lt MIN 0.25 Lt 5 6