DeLonghi TCH7590EB Owner Manual - Page 7

Check that the appliance is receiving power.

Page 7 highlights

Additional safety features 1. Overheating protection: a safety device switches the fan heater off if it accidentally overheats (e.g. air intake and outlet grilles obstructed, motor not turning or turning slowly). To restore normal operation, remove the plug from the power outlet and leave it unplugged for a few minutes, eliminate the cause of overheating, then plug the fan heater back in again. 2. Tip over safety switch: a safety tip-over switch turns the fan heater off if it tips over or is positioned in an improper way that could jeopardize safety. Note: To avoid overheating the appliance, do not cover it. TROUBLE-SHOOTING If the appliance shuts off unexpectedly: - Check that the appliance is receiving power. - Check that the appliance is in the vertical position and on a flat surface, as the safety tipover switch may have been tripped. - Check the temperature set and the timer. The appliance may be off because the set temperature has been reached or the time set on the timer has elapsed. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

7
Additional safety features
1.
Overheating protection:
a safety device switches the fan heater off if it
accidentally overheats
(e.g. air intake and outlet grilles obstructed, motor not turning or turning slowly). To restore nor-
mal operation, remove the plug from the power outlet and leave it unplugged for a few minutes,
eliminate the cause of overheating, then plug the fan heater back in again.
2.
Tip over safety switch:
a safety tip-over switch turns the fan heater off if it tips over or is positio-
ned in an improper way that could jeopardize safety.
Note:
To avoid overheating the appliance, do not cover it.
TROUBLE-SHOOTING
If the appliance shuts off unexpectedly:
-
Check that the appliance is receiving power.
-
Check that the appliance is in the vertical position and on a flat surface, as the safety tip-
over switch may have been tripped.
-
Check the temperature set and the timer.
The appliance may be off because the set temperature has been reached or the time set on
the timer has elapsed.