Definitive Technology BP2X BP1.2X/BP2X Manual - Page 3

For Front Effects Speakers The BP1.2X and BP2X are ideal for use as front effects speakers in DSP installations. They should be placed on the front wall with the wire terminals against the wall and the speakers separated by approximately two-thirds of the front wall. Placement above ear level is recommended if possible; however, lower placement is possible, if necessary. Mounting the BP1.2X and BP2X Each BP1.2X and BP2X comes with a premounted mounting plate which may be used to hang the speakers on the wall. Use a toggle bolt or other similar anchored fastener in the wall to hold the screw which the mounting plate will hang on. Do not use an unanchored screw in the wall. Technical Assistance It is our pleasure to offer assistance if you have any questions regarding your BP1.2X and BP2X or their setup. Please contact your nearest Definitive Technology dealer or contact us directly at 410-363-7148. Service Service and warranty work on your Definitive loudspeakers will normally be performed by your local Definitive Technology dealer. If, however, you wish to return the speaker to us, please contact us first, describing the problem and requesting authorization as well as the locations of the nearest factory service center. Please note that the address given in this booklet is the address of our offices only. Under no circumstances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization. Definitive Technology Offices 11433 Cronridge Drive Owings Mills, Maryland 21117 Phone: 410-363-7148 Visit us at www.definitivetech.com