Definitive Technology Mythos ST-L SuperTower Mythos ST-L English Manual - Page 15

Subwoofer Adjustment

Get Definitive Technology Mythos ST-L SuperTower PDF manuals and user guides View all Definitive Technology Mythos ST-L SuperTower manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

EN Subwoofer Adjustment 1. S elect "Left" on the slide switch on the input panel of the Left unit (as you face the speaker) and "Right" on the right speaker. 2. S et the "Subwoofer Gain" on each speaker's input plate to 0dB (the correct setting for most systems and rooms). 3. S et the balance control on your receiver or preamp to full left channel (or disconnect the right channel speaker if you don't have a balance control). 4. On the remote, press the Low Level Off button to make sure that function is disengaged. 5. Now play a mono music recording that has a good balance of bass and midrange. Set the Left Bass level control until you hear a good balance of bass to midrange. As you change bass level, the white LEDs on the front of the speaker will indicate the variation + or - from 0dB in 1dB increments (see explanation of LEDs on page 15). If you have to turn the bass level nearly all the way up to +7dB to get the bass level you want, go back to the subwoofer gain button (Sub Gain) on the input panel and switch to the +10 dB position. If you have to turn the bass level all the way down to get the bass level you want, go back to the subwoofer gain switch on the input panel and switch to the -10 dB position. Repeat the process for the other channel (the other tower). SUB LEVEL SUB GAIN 15 1.800.228.7148 www.definitivetech.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
15
1.800.228.7148
www.definitivetech.com
EN
SUBWOOFER ADJUSTMENT
1.
Select “Left” on the slide switch on the input panel of the Left unit (as you face the
speaker) and “Right” on the right speaker.
2.
Set the “Subwoofer Gain” on each speaker’s input plate to 0dB (the correct setting for
most systems and rooms).
3.
Set the balance control on your receiver or preamp to full left channel (or disconnect the
right channel speaker if you don’t have a balance control).
4.
On the remote, press the Low Level Off button to make sure that function is disengaged.
5.
Now play a mono music recording that has a good balance of bass and midrange. Set
the Left Bass level control until you hear a good balance of bass to midrange.
As you change bass level, the white LEDs on the front of the speaker will indicate the varia-
tion + or – from 0dB in 1dB increments (see explanation of LEDs on page 15).
If you have to turn the bass level nearly all the way up to +7dB to get the bass level you
want, go back to the subwoofer gain button (Sub Gain) on the input panel and switch to the
+10 dB position.
If you have to turn the bass level all the way down to get the bass level you want, go back
to the subwoofer gain switch on the input panel and switch to the –10 dB position. Repeat
the process for the other channel (the other tower).
SUB LEVEL
SUB GAIN