Definitive Technology UIW RLS II UIW RLSII Manual - Page 6
Troubleshooting Your In-Wall Loudspeakers, Step by Step Installation, Technical Assistance - in wall speaker
View all Definitive Technology UIW RLS II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step by Step Installation (continued) • To install speaker, first rotate screws one-half turn counter clockwise to swing the dogs into position and clear the edge of the wall cutout. Then place speaker frame in position in the cutout and rotate screws clockwise one-half turn to grip the wall. Tighten by hand until frame is stable but loose enough to be adjusted in final position. Level the speaker frame and snug screws into place taking care not to overtighten. • Fit grill on frame. Troubleshooting Your In-Wall Loudspeakers If you experience any difficulties with your Ultimate In-Wall Loudspeakers, try the suggestions described below. If you are still having problems, please consult your Definitive Technology authorized dealer for assistance. • Make sure all your system interconnections and power cords are solidly in their place. • Check to be sure that the power cords and/or speaker wires have not been damaged. • Many amplifier/receivers have sophisticated internal protection circuitry. If for some reason the protection circuitry is tripped, please turn down the system's volume and wait five minutes before trying the system again. Technical Assistance It is our pleasure to offer assistance if you have any further questions or comments. Please feel free to contact our technical support staff at Definitive Technology, LLP, 11433 Cronridge Dr., Suite K, Owings Mills, MD 21117 or call (410) 363-7148. Visit us at www.definitivetech.com 6