Dell 1235 Color Laser User's Guide - Page 27
Changing the size of the paper in the paper tray, MEDIA TYPE, GUIDELINES
View all Dell 1235 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
MEDIA TYPE GUIDELINES Preprinted paper • Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printer's fusing temperature for 0.1 second. Check your printer's specification to know the fusing temperature, see "General specifications" on page 72. • Letterhead ink must be non-flammable and should not adversely affect printer rollers. • Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage. • Before you load preprinted paper, such as forms and letterhead, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. Using photographic paper or coated paper may cause problems, requiring repairs. Such repairs are not covered by Dell's warranty or service agreements. CHANGING THE SIZE OF THE PAPER IN THE PAPER TRAY To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray. To change the tray 1 size to other size, you must adjust the paper length guide properly. 1. Pull the tray 1 out of the printer. Open the paper cover and remove paper from the tray 1 if necessary. 2. Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually. 4. Slide the paper length guide until it lightly touches the end of the paper stack. Squeeze the paper width guide and slide it to the edge of the paper stack without causing it to bend. For paper smaller than Letter-sized, return the paper guides to their original positions and adjust the paper length guide and paper width guide. If the paper that you need to print is shorter than length 222 mm (8.74 inches), press and unlatch the guide lock in the tray, push the tray in manually. Adjust the paper length guide and paper width guide. 3. Load paper into the tray. • Do not push the paper width guides far enough to cause the materials to warp. • If you do not adjust the paper width guides, it may cause paper jams. 5. Close the paper cover. Loading originals and print media | 27