Dell 1235cn User's Guide - Page 64
Black Start, Black Only - transfer belt error
View all Dell 1235cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
MESSAGE Send Error (SMTP) Send Error (Wrong Config) [Stop Pressed] Toner Empty T Toner Exhausted T Toner Low T MEANING SUGGESTED SOLUTIONS There is a problem in Change to the available SMTP. server. There is a problem on Configure your network the network interface interface card correctly. card. Stop/Clear has been pressed during an operation. Try again. The toner cartridge has run out. The printer stops printing. Press OK to toggle the message to Stop or Continue or Black Only. W Stop X If the black toner cartridge is empty, Black Only message does not appear. You can select the option among Stop, Continue or Black Only with the left/right arrow. If you select Stop by pressing OK on the control panel, the printer stops printing. If you select Continue, the printer keeps printing, but the quality cannot be guaranteed. If you select Black Only, the printer prints the data in black. In this case, the mono printing feature is preset in the printer properties. When you copy, the Black Start button will be activated only with this condition. If you do not select any, the printer will work as Stop is selected. Replace the toner cartridge with a new one. See "Replacing the toner cartridge" on page 53. The lifespan of the toner cartridge which the arrow indicates is reached. This message appears when the toner is completely empty, and your printer stops printing. Replace the corresponding toner cartridge with a Dellgenuine cartridge. See "Replacing the toner cartridge" on page 53. The corresponding toner cartridge is almost empty. Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations. MESSAGE Transfer Belt Error Tray Paper Empty Tray Paper Mismatch MEANING SUGGESTED SOLUTIONS A problem has occurred in the transfer belt in the printer. Turn the power switch off and on. If the problem persists, call for service. There is no paper in the tray. Load paper in the tray. The paper size specified in the printer properties does not match the paper you are loading. Load the correct paper in the tray. 64 | Troubleshooting