Dell 2145cn Multifunction Color Laser Printer User's Guide - Page 66
In the multi-purpose tray
View all Dell 2145cn Multifunction Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
In the multi-purpose tray When you print using the Multi-purpose Tray and the printer detects that there is either no paper or that the paper has been improperly loaded, follow the next steps to release the jammed paper. 1. Check if the paper is stuck in the feeding area, and if so, pull it out gently and slowly. 7. Using the handle, completely open the front cover. If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to step 2. 2. Close the multi-purpose tray. 3. Pull the tray out. 4. Open the inner cover while you are pushing the lever with two hands. 8. Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. 5. Pull the paper out gently. 6. Replace the tray. If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to step 8. • Do not touch the green surface, the OPC drum or the front of each toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area. • Be careful not to scratch the surface of the paper transfer belt. • If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover should the installation need to be halted for any reason. 9. Close the front cover firmly. The printer will resume printing. If the front cover is not completely closed, the printer will not operate. 66 | Troubleshooting