Dell 2155cn User Manual - Page 503

Print Always Prints a protocol monitor report after every fax transmission. Print On Error Prints the protocol monitor report only when an error occurs. Print Disable* Does not print the protocol monitor report. System Settings Use System Settings to configure the power saving mode, warning tones, time-out duration, device display language, and job log auto print settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Power Saver Timer Purpose: To specify the time for transition to power saver mode. Values: Sleep 3min* 1-30 min. Deep Sleep 10min* 5-60 min. Specifies the time taken by the printer to enter Sleep mode after it finishes a job. Specifies the time taken by the printer to enter Deep Sleep mode after it has entered Sleep mode. Enter 3 to put the printer in power saver mode 3 minutes after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Enter 3 if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 1 and 30 minutes for power save mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any button on the operator panel. Understanding the Printer Menus 501