Dell 223-4689 User's Guide - Page 81
Installing and Configuring the Dell Internal Network Adapter
View all Dell 223-4689 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
The following security types are supported: No security WEP with either 64-bit or 128-bit key WPA with 128-bit TKIP encryption engine WPA2 with 128-bit AES-CCMP encryption engine A WPA (WiFi Protected Access) pre-shared key is like a password and must meet the following criteria: If you are using Hexadecimal characters, valid keys are 64 characters long. If you are using ASCII, valid keys are at least 8 characters long. The wireless network may use anywhere from one to four WEP keys. A WEP key is like a password and must meet the following criteria: If you are using Hexadecimal characters, valid keys are either 10 or 26 characters long. If you are using ASCII, valid keys are either 5 or 13 characters long. Installing and Configuring the Dell Internal Network Adapter 1150 Installing the Adapter NOTE: If your printer came with the Dell Internal Network Adapter 1150 pre-installed, go to Configuring the Adapter for a Wireless Connection or Configuring the Adapter for an Ethernet Connection. 1. Turn off your printer, and then unplug the power cable from the wall outlet. NOTICE: Failure to unplug the printer can cause damage to your printer and adapter. 2. Remove the back cover.