Dell 2330dn Service Manual - Page 76
Printer setup
UPC - 807027103130
View all Dell 2330dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Printer setup Printer Setup displays the following selections: • Defaults (U.S.*, Non-U.S.) • Page Count • Perm Page Count • Serial Number • Engine Setting (1 through 4) • Model Name • Configuration ID • Edge to Edge • Par S Strobe Adj (only displayed if the printer has a standard parallel port) Defaults The value of this setting determines whether the printer uses the U.S. or Non-U.S. factory default value for the settings listed below: Device Setting Paper sizes Envelope size PCL Symbol Set PPDS Code Page Universal Units of Measure U.S. value Letter 10 PC-8 437 Inches Non-U.S. value A4 DL Envelope PC-850 850 Millimeters If the value of a setting is changed, then Submitting Changes... displays. Press and return to the Printer Setup menu. to exit the Defaults setting Printed Page Count (Page Count) The value of this setting gauges the amount of usage on the printer. The Page Count setting's value will equal the values of the Picked Sides meter. After all print tests have been completed, the value will reset to "0." Note: The value of this setting cannot be changed manually. Press to exit the Page Count setting and return to the Printer Setup menu. Permanent Page Count (Perm Page Count) The value of this setting indicates the total number of pages that have been printed. After all print tests have been completed, the value will reset to "0." Note: The Permanent Page Count's value cannot be reset. Press to exit the Permanent Page Count and return to the Printer Setup menu. Serial Number The serial number can only be viewed and cannot be changed. To view the serial number: 1. Select Serial number from PRINTER SETUP. 2. Press Return to return to PRINTER SETUP. 3-12