Dell 2355dn Multifunction Mono Laser Printer User's Guide - Page 291
Fax Problems, Fax Line Test
View all Dell 2355dn Multifunction Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Fax Problems Condition Suggested solutions Receiving fax calls are not being answered by the printer • Receive Mode set to Tel mode. (manual receive mode) • The rings-to-answer setting might not be set correctly. (Under Ans/Fax mode, set the Ring to Answer to a digit greater than the Ring to Answer setting for the TAD.) • The DPRD feature might be turned on, but you do not have the service, or you do have the service and the feature is not set correctly. • The fax line cord might not be correctly connected, or the fax line cord is faulty. • The printer might not be able to detect Receiving fax tones because the answering machine is playing a voice message. • A voice-messaging service might be interfering with the printer as it attempts to answer calls. • Fax Line might have signal integration issues. Please carry out Fax Line Test from Op-panel to confirm line status. See "Testing Fax line connection". • The printer is monitoring line condition while it is receiving or sending a fax job. If an error occurs during the transmission and the ECM Mode setting is On, the printer may request that the portion of the fax job to be resent. You should turn off ECM Mode only if you are having trouble sending or receiving a fax job, and you are willing to accept the errors in the transmission job. Turning off the setting might be useful when you are trying to send a fax long distant or receive from long distant (example: other countries etc.) • The printer might be out of paper and the memory is full. The printer cannot receive faxes • The fax cable might not be securely connected. from an extension telephone. • The printer dialing mode might be incorrectly set, or the extension phone might be incorrectly set. Faxes are not received automatically. • The Fax mode should be selected. • Make sure that there is paper in the paper tray. • Check to see if the display shows Memory Full. The Receiving fax has blank spaces or is received in poor-quality. • A noisy phone line can cause line errors. • Check your printer by making a copy. Receiving faxes are too light. The printer might be running out of toner while printing a fax. Under Toner empty conditions, the printer will store the fax job into memory, as soon as possible, replace the print cartridge, and then reprint the fax. Faxes are printed on two pages The auto reduction setting may be turned Off, try enabling this setting instead of one. 290