Dell 5130 Color Laser User's Guide (PDF) - Page 130
Bonjour mDNS, SNMP v1/v2c, Edit SNMP v3 Properties
View all Dell 5130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Bonjour (mDNS) Purpose: To configure the detailed settings for Bonjour. Values: Host Name Printer Name Specifies the host name up to 63 alphanumeric characters and "-" (dash). The original setting will remain valid if no input is made. Specifies the printer name up to 63 alphanumeric characters and symbol sets. The original setting will remain valid if no input is made. SNMP Purpose: To configure the detailed settings of SNMP. Values: Enable SNMP v1/v2c Protocol Edit SNMP v1/v2c Properties Enable SNMP v3 Protocol Edit SNMP v3 Properties Select the check box to enable the SNMP v1/v2c protocol. Click to display SNMP v1/v2c page and to edit the setting of SNMP v1/v2c protocol from the page. Select the check box to enable the SNMP v3 protocol. Click to display SNMP v3 page and to edit the setting of SNMP v3 protocol from the page. Without SSL communication is enabled, you cannot click this item. SNMP v1/v2c Purpose: To edit the detailed settings of SNMP v1/v2c protocol. To enter this page, click Edit SNMP v1/v2c Properties in the SNMP page. Values: Community Name (Read only)*1 Specifies the community name to access (read only) data using up to 31 alphanumeric characters. The original setting will remain valid if no input is made. Characters entered for community name in the previous settings will not be displayed on the screen. The default Read Community is public. Re-enter Community Name (Read only)*1 Enter the community name to access (read only) data again to confirm it. Community Name (Read/Write) *1 Specifies the community name to access (read and write) data using up to 31 alphanumeric characters. The original setting will remain valid if no input is made. Characters entered for community name in the previous settings will not be displayed on the screen. The default Read/Write Community is private. Re-enter Community Name (Read/Write) *1 Enter the community name to access (read and write) data again to confirm it. Community Name (Trap)*1 Specifies the community name used for trap up to 31 alphanumeric characters. The original settings will remain valid if no input is made. Characters entered for Community Name (Trap) in the previous settings will not be displayed on the screen. The default Trap Community is " " (NULL).