Dell 7700HD User's Guide - Page 89
Projector Upgrade, LAN cable, Browse
View all Dell 7700HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Projector Upgrade Use the Projector Upgrade page to update your projector's firmware. NOTE: Please disable and enable wireless/network using the OSD to restart the network card for the projector after firmware upgrade is successful. NOTE: Ensure the wireless standby mode is turn on (default is off), follow these steps: Advanced Settings -> Power Settings -> Wireless -> Always On. To start the firmware update, follow these steps: 1 Plug in the power cord and the projector will enter standby mode. 2 Connect the LAN cable to the projector and your computer. 3 Open your Internet browser and then enter the IP address (default IP address is 192.168.100.10). 4 At Projector Upgrade web page, press Browse to select the file to update. Using Your Projector 89