Dell Alienware Area-51 Service Manual - Page 55
Removing the Active-Venting Assembly
View all Dell Alienware Area-51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Removing the Active-Venting Assembly 1. Follow the instructions in "Before You Begin" on page 6. 2. Remove the left side-panel (see "Removing the Left Side-Panel" on page 15). 3. Remove the right side-panel (see "Removing the Right Side-Panel" on page 16). 4. Disconnect the active-venting assembly cables from the connectors on the master I/O board. 5. Remove the six screws (three on each side) that secure the active-venting panels to the active-venting assembly. 6. Remove the active-venting panels. 7. Remove the six screws (three on each side) that secure the active-venting assembly to the chassis. 8. Pivot the back of the active-venting assembly upwards and lift it off the chassis. CHAPTER 10: ACTIVE-VENTING ASSEMBLY 1 2 3 4 1 active-venting panels (2) 2 active-venting assembly 3 active-venting assembly screws (6) 4 active-venting panel screws (6) 055 /055