Dell Alienware Aurora R7 Aurora R7 Service Manual - Page 71

Removing the wireless card, Prerequisites, Procedure

Page 71 highlights

Removing the wireless card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the left-side cover. 2 Follow the procedure from step 1 to step 4 in "Removing the power-supply unit". Procedure 1 Remove the screw that secures the wireless card to the system board. 2 Lift the wireless-card bracket off the wireless card. 3 Disconnect the antenna cables from the wireless card. 4 Slide and remove the wireless card from the wireless-card slot. Figure 38. Removing the wireless card 1 wireless-card bracket 3 antenna cables 5 wireless card 2 screw 4 wireless-card slot 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Prerequisites
1
Remove the
left-side cover
.
2
Follow the procedure from step 1 to step 4 in "
Removing the power-supply unit
".
Procedure
1
Remove the screw that secures the wireless card to the system board.
2
Lift the wireless-card bracket off the wireless card.
3
Disconnect the antenna cables from the wireless card.
4
Slide and remove the wireless card from the wireless-card slot.
Figure 38. Removing the wireless card
1
wireless-card bracket
2
screw
3
antenna cables
4
wireless-card slot
5
wireless card
71