Dell Alienware Aurora R8 Service Manual - Page 54
Lift the processor-cooling assembly along with the cables off the computer., the system board.
View all Dell Alienware Aurora R8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4 Lift the VR heat sink off the computer. 5 Disconnect the processor-cooling assembly cables from the system board. 6 In reversed order (as indicated on the processor cooler), loosen the four captive screws that secure the processor cooler to the system board. NOTE: If your are using an electric screwdriver, torque the screws at 6.9 +/-1.15 kilogram-force centimeter (6 +/-1 pound force inch). 7 Lift the processor-cooling assembly along with the cables off the computer. 54
4
Lift the VR heat sink off the computer.
5
Disconnect the processor-cooling assembly cables from the system board.
6
In reversed order (as indicated on the processor cooler), loosen the four captive screws that secure the processor cooler to
the system board.
NOTE: If your are using an electric screwdriver, torque the screws at 6.9 +/-1.15 kilogram-force centimeter (6
+/-1 pound force inch).
7
Lift the processor-cooling assembly along with the cables off the computer.
54