Dell B1160 Mono Laser Printer User's Guide - Page 78
Installing driver over the network
View all Dell B1160 Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installing driver over the network 2 Windows 1 Make sure that the machine is connected to the network and powered on. Also, your machine's IP address should have been set. 3 Select Next. If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window. 2 Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run and an installation window will appear. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing "X" with the letter, which represents your CDROM drive and click OK. 4 Select Connect a network printer to the computer. Click Next. 2. Using a Network-Connected Machine (B1160w only) 78
78
2.
Using a Network-Connected Machine (B1160w only)
Installing driver over the network
2
Windows
1
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set.
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window
will appear.
If the installation window does not appear, click
Start
>
All programs
>
Accessories
>
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD-
ROM drive and click
OK
.
3
Select
Next
.
4
Select
Connect a network printer to the computer
. Click
Next
.