Dell B2360dn User Guide - Page 62
Universal Setup menu, Reports menu
View all Dell B2360dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Understanding the printer menus 62 Universal Setup menu Use Units of Measure Inches Millimeters Portrait Width 3-8.5 inches 76-216 mm Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Reports menu Reports menu Use Menu Settings Page Device Statistics To Identify the units of measure. Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments. Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray. To Print a report containing information about the paper loaded in trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information. Print a report containing printer statistics, such as supply information and details about printed pages.