Dell Brocade 5100 Fabric OS v7.2.0a Release Notes v1.0 - Page 56
Defect ID, Technical Severity, Summary, Symptom, Workaround, Probability, Feature, Function,
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Closed defects with code change in Fabric OS v7.2.0a Defect ID: DEFECT000468007 Technical Severity: High Summary: Host discovery issues via Ex ports on ICL in multi chassis configuration Symptom: Host may not see all target LUNs in a topology using multi-chassis EX ports on ICL configuration Workaround: Portdisable enable switch ports for affected devices. Probability: Medium Feature: FC Services Function: Name Server Reported In Release: FOS7.2.0 Defect ID: DEFECT000468188 Technical Severity: High Summary: observed MDD kept crashing when a DS was set persistently disabled Symptom: user may see MDD hit rolling crashing when the switch is configure VF mode and the DS switch is set disable persistently with MAPS enabled. Probability: Low Feature: Advanced Monitoring Services Function: Other Reported In Release: FOS7.2.0 Defect ID: DEFECT000468413 Technical Severity: High Summary: firmwaredownload -s on standby CP produces protocol failure in circuit setup messages on the console Symptom: Firmware download on the standby CP takes a long time to reach Y/N prompt and several "poll: protocol failure in circuit setup" console messages resulted. Workaround: Use firmwaredownload without the -s option. Probability: Low Feature: Striker/Spike Platform Services Function: VEX Reported In Release: FOS7.2.0 Defect ID: DEFECT000468455 Technical Severity: High Summary: QoS allowed ASIC buffer pool to become over allocated Symptom: Portbuffershow indicated a negative value in the remaining buffers after QoS was enabled on an extended distance link Probability: Medium Feature: 8G ASIC Driver Function: ASIC Driver Reported In Release: FOS7.2.0 Defect ID: DEFECT000468777 Technical Severity: Medium Summary: portcfgpersistentdisable -r does not persist the reason on reboot of a 7800 Symptom: port reason does not persist across a reboot on a 7800 switch when portcfgpersistentdisable -r is configured Probability: Medium Feature: 8G Platform Services Function: Other Reported In Release: FOS7.2.0 Defect ID: DEFECT000468795 Technical Severity: High Summary: FCIP FICON XRC Emulation Abort after Selective Reset Errors Symptom: If FICON XRC Emulation receives a Selective Reset for a device that is currently in Stacked Status State, the Selective Reset is incorrectly responded to by emulation processing leading to an abort sequence from the channel for the Selective Reset Exchange. Probability: Low Feature: FCIP Function: Emulation Reported In Release: FOS7.0.0 Service Request ID: 1205859 Fabric OS v7.2.0a Release Notes v1.0 Page 56 of 93