Dell Brocade 6505 Fabric OS Documentation Updates - Page 45
Fabric Watch Administrator’s Guide, In
View all Dell Brocade 6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter Fabric Watch Administrator's Guide 13 In this chapter The updates in this chapter are for the Fabric Watch Administrator's Guide, publication number 53-1002153-03, published April 2011. •Documentation updates for Fabric Watch v7.0.0 and later 35 Documentation updates for Fabric Watch v7.0.0 and later Chapter 1. Fabric Watch In the existing "Fabric Watch licensing" section, the following paragraph is incorrect: Fabric Watch is an optionally-licensed feature of Fabric OS. Each switch within a fabric needs its own license, and that license is valid only for a particular version of the feature. If you want a newer version of the feature, you must purchase a new license. This paragraph should read as follows: Fabric Watch is a optionally-licensed feature of Fabric OS. Once you purchase a Fabric Watch license for a platform, the license remains valid for the life of that platform and across firmware versions that are supported on that platform. The following is new licensing information and should be added as a subheading to "Fabric Watch licensing:" Universal temporary license support The Fabric Watch license is available as a Universal Temporary or a regular temporary license, meaning the same license key can be installed on any switch running Fabric OS version 6.3 or later. Universal temporary license keys can only be installed once on a switch, but can be applied to as many switches as required. Temporary use duration (the length of time the feature will be enabled on a switch) is provided with the license keys. Chapter 8. System Monitoring The following information does not currently exist in the Fabric Watch Administrator's Guide, and will be added at the next major release of Fabric OS: The default Fabric Watch policy for the Brocade DCX 8510-8 with total power consumption of more than 2000w does not properly reflect the switch status on the power supply. Fabric Watch users must manually update their default configuration for the minimum number of power supplies to three if they have installed more than 256 ports in an 8510-8 chassis. Fabric OS Documentation Updates 35 53-1002153-01