Dell Brocade M5424 Brocade M5424 Blade Server SAN I/O Module Hardware Referenc - Page 17
Optional features, Unpacking and installing the SAN I/O Module, Fabric OS Native Mode - script
View all Dell Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Optional features 1 Optional features The SAN I/O Module supports the following optional software, which is activated with the purchase of the corresponding license key. Applicable options depend on whether the SAN I/O Module operates in Switch or Access Gateway mode. Fabric OS Native Mode • Enhanced Group Management1 • Adaptive Networking • ISL Trunking • Advanced Performance Monitoring 1. included with the SAN I/O Module • Fabric Watch • Fabric Manager • Port on Demand (POD) licensing • Support for Brocade Fabric Access API and API Scripting Toolkit Access Gateway Mode • Fabric/Switch License • Brocade AG (N_Port) Trunking For detailed information on any of these features, refer to the Brocade Fabric OS Administrator's Guide. Unpacking and installing the SAN I/O Module If the SAN I/O Module is installed in the Blade Server Enclosure as shipped to you, skip this section. This section applies when installing a new module in an empty bay or replacing an existing SAN I/O Module. NOTE The SAN I/O Module is designed to work only in I/O bays B1/B2 and C1/C2 of the Dell M1000e Blade Server Enclosure. Make sure to comply with installation requirements in the Blade Server Enclosure Hardware Owner's Manual. Perform the following steps to remove the SAN I/O Module from its shipping package. 1. Open the shipping box and inspect the contents, making sure that nothing is missing or damaged. Do not insert a damaged SAN I/O Module into the Blade Server Enclosure. If the SAN I/O Module appears to be damaged, contact your sales representative before proceeding. 2. Remove the cardboard accessory tray from on top of the SAN I/O Module. This tray contains the documentation, regulatory statements, product information guide, and Documentation CD. 3. Remove the SAN I/O Module from the box. The protective foam ends will slide out with the SAN I/O Module. 4. Remove the foam ends from the SAN I/O Module. M5424 SAN I/O Module Hardware Reference Manual 7 53-1001082-01