Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 943

ROUTER RIP mode neighbor ip-address You can use this command multiple times to exchange RIP information with as many RIP networks as you want. • Disable a specific interface from sending or receiving RIP routing information. ROUTER RIP mode passive-interface interface Assigning a Prefix List to RIP Routes Another method of controlling RIP (or any routing protocol) routing information is to filter the information through a prefix list. A prefix list is applied to incoming or outgoing routes. Those routes must meet the conditions of the prefix list; if not, the system drops the route. Prefix lists are globally applied on all interfaces running RIP. Configure the prefix list in PREFIX LIST mode prior to assigning it to the RIP process. For configuration information about prefix lists, refer to Access Control Lists (ACLs). To apply prefix lists to incoming or outgoing RIP routes, use the following commands. • Assign a configured prefix list to all incoming RIP routes. ROUTER RIP mode distribute-list prefix-list-name in • Assign a configured prefix list to all outgoing RIP routes. ROUTER RIP mode distribute-list prefix-list-name out To view the current RIP configuration, use the show running-config command in EXEC mode or the show config command in ROUTER RIP mode. Adding RIP Routes from Other Instances In addition to filtering routes, you can add routes from other routing instances or protocols to the RIP process. With the redistribute command, you can include open shortest path first (OSPF), static, or directly connected routes in the RIP process. To add routes from other routing instances or protocols, use the following commands. • Include directly connected or user-configured (static) routes in RIP. ROUTER RIP mode redistribute {connected | static} [metric metric-value] [route-map map-name] • metric-value: the range is from 0 to 16. • map-name: the name of a configured route map. • Include specific OSPF routes in RIP. ROUTER RIP mode Routing Information Protocol (RIP) 943