Dell C1760NW Dell Users Guide - Page 80

Status of Wi-Fi | WPS Button Backlight This section describes when the backlight of the (Wi-Fi | WPS) button lights up or blinks. For more information, see "Wireless Problems" on page 224. Wi-Fi | WPS Button Backlight Off On Wireless LAN Printer Status settings*1 Error Message N/A Connected to the network via Ethernet - cable; Wi-Fi settings is not available when an Ethernet cable is connected to the printer. Disable - - Enable The printer enters Sleep/Deep Sleep mode - Enable Wireless link established ­ Blinking Enable normal Searching for wireless LAN access point or ­ router Blinking Enable slowly Searching/Connecting with WPS access ­ point or router during wireless operation Blinking Enable fast No wireless LAN access point or router found within the specified time Wireless Timeout Error WPS Connection failure WirelessDownload Error Wireless LAN access point or router found Wireless Password Error but connection error occurs (Passphrase error) Detected WPS signals from multiple access Wireless Session Overlap points or routers during wireless operation Error (session overlap) WPS Connection failure; Security setting of Wireless WEP AP Connected the wireless LAN access point or router is Error WEP, which is unsupported on WPS. Wrong WEP key entered during the wireless WEP Key Input Error setup *1 You can enable/disable the Wireless LAN settings. For more information, see "Wireless LAN" on page 127. 78 Operator Panel