Dell C5765DN Dell Color Laser Multifunction Printer Blue Angel Tech Sheet - Page 10

User Information Per Blue Angel Mark Requirements of RAL-UZ171 Energy data Information on the Device Dell™ C5765dn Color Laser Multifunction Printer with High Capacity Feeder Power consumption and default times of Dell C5765dn Color Laser Multifunction Printer with High Capacity Feeder during time elapsed after last print 150 Ready mode (130W) 100 print mode 50 power consumption (W) 10 Energy saving mode 2 (3.5W) 0 8 10 time (min.) Time elapsed after last printing = idle mode [minutes] Electric power consumption of a device depends both on its characteristics and on the way you use it. Your device is designed and pre-set so that you can save electricity costs. It switches over to the mode "ready" after the last copy. From there, the device can immediately start printing again if required. If not required, the device switches over to electric power saving modes in two steps after a certain time, which is called activation time. In these modes, it consumes less power (watt). The device will take some more time to print again from an electric power saving mode than from the mode "ready". This delay is called return time, which is quite long for some devices. The device Dell™ C5765dn Color Laser Multifunction Printer with High Capacity Feeder, however, fulfills the strict Blue Angel requirements for the return time (http://www.blauer-engel.de). It only takes 16 seconds, for example, to return from Energy saving mode 2 to ready mode for printing. This is only a short moment for you but will help you to save electricity and hence operating costs if the device is pausing (hence, during no-load operation). The device is so designed in such a way that switching it on and off up to twice a day to the plug-in off mode will not cause damage. DELL CONFIDENTIAL - PRELIMINARY 9/20/13 - FOR PROOF ONLY