Dell C9000 Line Cards Networking Command-Line Reference Guide for the C9000 Se - Page 1292

To return to the default, use the no advertise med locationidentification {coordinate-based value | civic-based value | ecs-elin value} command. Parameters coordinate-based value civic-based value ecs-elin value Enter the keywords coordinate-based then the coordinated based location in hexadecimal value of 16 bytes. Enter the keywords civic-based then the civic based location in hexadecimal format. The range is from 6 to 255 bytes. Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency Location Identification Number (elin) numeric location string. The range is from 10 to 25 characters. Defaults unconfigured. Command Modes CONFIGURATION (conf-lldp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.7.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series and E-Series. Usage Information • • ECS - Emergency call service such as defined by TIA or the national emergency numbering association (NENA) ELIN - Emergency location identification number, a valid North America Numbering Plan format telephone number supplied for ECS purposes. Related Commands debug lldp interface - debugs LLDP. show lldp neighbors - displays the LLDP neighbors. show running-config lldp - displays the LLDP running configuration. 1292 Link Layer Discovery Protocol (LLDP)