Dell D1901N User Manual - Page 7
Controls And Connectors, Signal Cable
View all Dell D1901N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CONTROLS AND CONNECTORS SIGNAL CABLE Connecting the Signal Cable: Plug the Signal Cable one end to LCD monitor's "DSUB-Input" socket , the other end to the computer's VGA port and tighten the two screws on the cable connector. Connecting the Power Cord: Plug one end of the AC power cord to the LCD monitor's AC input socket, and the other end to Wall outlet. Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). 1 2 Figure 2 Connecting Cables 1. Power Cable 2. Signal Cable
CONTROLS AND CONNECTORS
SIGNAL CABLE
Connecting the Signal Cable:
Plug the Signal Cable one end to LCD
monitor’s “DSUB-Input” socket , the other end to the computer’s VGA port and
tighten the two screws on the cable connector.
Connecting the Power Cord:
Plug one end of the AC power cord to the
LCD monitor's AC input socket,
and the other end to Wall outlet.
Caution:
If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
Figure 2
Connecting
Cables
1.
Power Cable
2
.
Signal Cable
1
2