Dell DJ42F61 Owner's Manual - Page 59
Audio Controller, Network Controller, If necessary, disconnect any cables connected to the card.
UPC - 027714920233
View all Dell DJ42F61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can cause damage to the equipment. 6 If you installed a sound card: a Enter system setup (see "System Setup" on page 80), select Audio Controller, and then change the setting to Off. b Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel. 7 If you installed an add-in network adapter and want to disable the integrated network adapter: a Enter system setup (see "System Setup" on page 80), select Network Controller, and then change the setting to Off. b Connect the network cable to the add-in network adapter's connectors. Do not connect the network cable to the integrated connector on the back panel. 8 Install any drivers required for the card as described in the card documentation. Removing a PCI Card 1 Follow the procedures in "Before You Begin" on page 45. 2 If necessary, disconnect any cables connected to the card. 3 Remove the securing screw from the card bracket. 4 Grasp the card by its top corners, and ease it out of its connector. 5 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. If you need a filler bracket, contact Dell (see "Contacting Dell" on page 89). NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 6 Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on. 7 Remove the card's driver from the operating system. 8 If you removed a sound card: a Enter system setup (see "System Setup" on page 80), select Audio Controller, and then change the setting to On. b Connect external audio devices to the audio connectors on the computer back panel. 9 If you removed an add-in network connector: a Enter system setup (see "System Setup" on page 80), select Network Controller, and then change the setting to On. b Connect the network cable to the integrated connector on the computer back panel. Removing and Installing Parts 59