Dell DL1000 Dell DL1000 Appliance Getting Started Guide - Page 3
Installation And Configuration, Unpacking A Rack System, Installing The Rails And System In A Rack - review
![]() |
View all Dell DL1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installation And Configuration WARNING: Before performing the following procedure, review the safety instructions that came with the system. Unpacking A Rack System Unpack your system and identify each item. Installing The Rails And System In A Rack Assemble the rails and install the system in the rack following the safety instructions and the rack installation instructions provided with your system. Figure 1. Installing the Rails and System in a Rack Using The System Without A Rack You can use the system without the server rack. When you are using the system without a rack, ensure that you follow these guidelines: • The system must be placed on a solid, stable surface that supports the entire system. NOTE: The system must not be placed vertically. • Do not place the system on the floor. • Do not place anything on top of the system. The top panel may deflect under the weight and cause damage to the system. • Ensure adequate space around the system for proper ventilation. • Ensure that the system is installed under the recommended temperature conditions as stated in the Technical Specification - Environmental Section of this document. CAUTION: Failure to follow these guidelines may result in damage to the system or physical injury. 3
![](/manual_guide/products/dell-powervault-dl1000-dell-dl1000-appliance-getting-started-guide-4ffec44/3.png)