Dell DL4300 Appliance Owners Manual - Page 121
Internal dual SD module (optional), Next steps, Related Links, Redundancy, Mirror Mode
View all Dell DL4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Figure 58. Installing the expansion card riser 3 1. riser guide-front 3. expansion card riser 3 5. expansion card riser 3 connector 2. power connector (for GPU cards) 4. riser guide-back Next steps 1. Install the expansion card(s) into the expansion card risers 2 or 3. 2. Follow the procedure listed in the After working inside your system section. 3. Install any device drivers required for the card as described in the documentation for the card. Related Links Safety instructions After working inside your system Before working inside your system Internal dual SD module (optional) The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features: • Dual card operation - maintains a mirrored configuration by using SD cards in both the slots and provides redundancy. NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information is replicated from one SD card to another. • Single card operation - single card operation is supported, but without redundancy. 121