Dell DR6000 Owners Manual - Page 120
Error Code, Message Information, SEL0008, Message, Details, Action, SEL1204, TMP0118
View all Dell DR6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Error Code SEL0008 SEL0012 SEL1204 TMP0118 TMP0119 TMP0120 Message Information Message Details Action Log is full. When the event log is full, additional events are not written to the log. Older events may be overwritten and lost. This message may also appear if the user disabled event logging. Backup and clear log. Message Details Action Could not create or initialize the system event log. If the system event log fails to initialize, platform status and failure events are not captured. Some management software do not report platform exceptions. Reboot the management controller or iDRAC. Cycle system input power. If problem persists call support. Message Details Action An unknown system hardware failure detected. If the system event log failed to initialize, platform status and failure events are not captured. Some management software do not report platform exceptions. Re-configure system to the minimum supported configuration. If issues persists, contact support. Message Details Action The system inlet temperature is less than the lower warning threshold. Ambient air temperature is too cool. Check the system operating environment. Message Details Action The system inlet temperature is less than the lower critical threshold. Ambient air temperature is too cool. Check the system operating environment. Message Details Action The system inlet temperature is greater than the upper warning threshold. Ambient air temperature is too warm or one or more fans may have failed. Check the system operating environment and review event log for fan failures. 120