Dell Dimension 5150 Owner's Manual - Page 30
Setting Your Computer to RAID-Enabled Mode, Drives, SATA Operation, RAID On, Save/Exit
View all Dell Dimension 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setting Your Computer to RAID-Enabled Mode 1 Enter system setup (see "System Setup" on page 107). 2 Press the up- and down-arrow keys to highlight Drives, and press . 3 Press the up- and down-arrow keys to highlight SATA Operation, and press . 4 Press the left- and right-arrow keys to highlight RAID On, press , and then press . NOTE: For more information about RAID options, see "System Setup Options" on page 109. 5 Press the left- and right-arrow keys to highlight Save/Exit, and press to exit system setup and resume the boot process. 30 Setting Up and Using Your Computer
30
Setting Up and Using Your Computer
Setting Your Computer to RAID-Enabled Mode
1
Enter system setup (see "System Setup" on page 107).
2
Press the up- and down-arrow keys to highlight
Drives
, and press <Enter>.
3
Press the up- and down-arrow keys to highlight
SATA Operation
, and press <Enter>.
4
Press the left- and right-arrow keys to highlight
RAID On
, press <Enter>, and then press <Esc>.
NOTE:
For more information about RAID options, see "System Setup Options" on page 109.
5
Press the left- and right-arrow keys to highlight
Save/Exit
, and press <Enter> to exit system setup and
resume the boot process.