Dell Dimension 8300 Owner's Manual - Page 99
Installing a Floppy Drive, Attach the floppy-drive power cable to the floppy drive. - cooling fan
View all Dell Dimension 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Installing a Floppy Drive 1 Gently slide the drive into place until the tabs securely click into position. 2 Attach the floppy-drive cable to the floppy drive and to the system board floppy-drive connector. Ensure that you route the floppy-drive cable through the cable restraint located on the side of the floppy-drive bay. 3 Attach the floppy-drive power cable to the floppy drive. power cable floppy-drive cable cable restraint system board floppy-drive connector 4 Check all cable connections and fold cables out of the way to provide airflow for the fan and cooling vents. 5 Close the computer cover (see page 100). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 6 Connect your computer and devices to electrical outlets, and turn them on. 7 After you turn on your computer, press when you are prompted to enter setup mode. Adding Parts 99