Dell Dimension C521 Owner's Manual - Page 77
Hard Drive, Removing a Hard Drive - hard drive replacement
View all Dell Dimension C521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Hard Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it. NOTICE: If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure. Check the documentation for the drive to verify that it is configured for your computer. Removing a Hard Drive 1 Follow the procedures in "Before You Begin" on page 59. NOTE: In the following steps it is not necessary to disconnect the cables connecting the CD/DVD or floppy drive or the Media Card Reader, as long as it does not obstruct your working area once it is set aside. 2 Remove the CD/DVD drive (if installed) from the bay and carefully set it aside (see "Removing a CD/DVD Drive" on page 87). 3 Remove the floppy drive or Media Card Reader (if installed) from the bay and carefully set it aside (see "Removing a Media Card Reader" on page 84 or "Removing a Floppy Drive" on page 81). 4 Press in on the two plastic securing clips on each side of the drive and slide the drive towards the back of the computer. NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to the cables and the cable connectors. 5 Lift the drive out of the computer and disconnect the power and data cables from the drive. Removing and Installing Parts 77